R Panel® is a CLASS A low temperature radiant system. The radiator has been designed to save energy saving, promote renewable energy sources, and reduction CO2 emissions. R Panel® is not just a product but a technology resulted from years of scientific research. The know-how developed by our company allow us to offer unique solutions to customers. The R Panel® Heating and Cooling is for everybody, for new or existing installations.
|Suggested working temperature||35°C – 42°C (95°F – 108°F)|
|With non-condensing boilers||45°C – 55°C (113°F – 131°F)|
|Working Temperature controlled by anti-condensation controller in the range||13°C – 21°C (55°F – 70°F)|
|Max working pressure||3 bar|
|Max working temperature||95°C (203°F)|
|Thermovector fluid||water + R Panel® additive AD-34/1|
|Average liquid capacity||1.2 l/m2|
|Panel feeding||crossed; inlet down, outlet up(***)|
|Energetic compatibility||traditional energy sources, solar energy, geothermal energy.|
(**) Production after 01/01/2010
R Panel® is the ideal partner for green energy solutions in buildings. With respect to traditional heating/cooling systems, R Panel® allows lowering considerably the size of the energy source (chiller, geothermal heat pump, etc). Indeed, R Panel® takes advantage of the thermal inertia of the solid structures of the house (walls, ceiling, floor), reduces the energy losses and allow a more rational use of the energy resources.
The low operating temperature and its high efficiency make R Panel® ideal for the exploitation of alternative energies.
With R Panel®, the energy request of the building is lowered and distributed in the time, in such a way to reduce the working temperature. This results in a wide reduction of the heat losses and a more rational distribution of resources.
- Saving up to 60%
Quick thermal response
Uniform heat distribution
Heat transfer by radiation higher than 70% (unique in the market)
Very low water content: 1.2 l/m² (unique in the market)
- No noise and drafts
Maximum thermal comfort
Ideal as energetic integration of the radiating-floor systems
Ideal for condensing boilers, geothermal heat pumps, solar energy.
With R Panel® you can cool your house without the problems associated to the convective systems. In a house conditioned with R Panel® you can feel the same comfort of a wonderful cellar in summer, saving up money.
The R Panel® cooling solves the drawbacks of traditional systems. R Panel® realizes the best conditions for your thermal comfort and health. This is possible thanks to the technical features of the radiant panel and to the use of an innovative anti-condensing electronic control.
The peculiarities of the R Panel radiant cooling system can be summarized as follows:
Heating high-volume buildings like industrial sheds is one of the strong points of the R Panel® technology. In this case the advantages such as energy saving and thermal efficiency remarkable also in the case of small-medium size rooms become more and more pronounced.
The use of irradiation instead of convection allows one to operate at lower temperatures, to have a very small temperature vertical gradient and fewer thermal losses. The distribution of heat is uniform, leading to high thermal comfort.
In the following it is shown a comparison between the R Panel® technology and a traditional convective system. The installed power is related to an activation of the plant 24h/24h. The data reported are the official ones obtained by the Department of Engineering of the University of Catania (IT). It is evident the energy saving obtained with the R Panel® technology can overcome the 45%.
Research and Development
The Scientific Research and the Technological Development have always been the driving force of our company. In our opinion, these are the essential ingredients to provide customers a unique service with respect to our competitors. The continuous research in the field of climatization and alternative-energy allows us not only to have strong-performing products, but also to provide advice specific to our customers.
Our scientific research is often carried out in close cooperation with University Departments of Physics and Engineering.
Main partners: University of Catania (Italy), University of Palermo (Italy), University of Geneva (Switzerland)
Accessories resulted from our R&D activity
QR2-50/PLC R Panel Anticondensation Controller
The R2-50 PLC regulator is multi-zone climate controller designed to prevent dew formation in R Panel® cooling systems. The unit is able to ensure the best hydrothermal conditions and to optimize the system performance.
HRV 818/PLC Anticondensation Probe
The anticondensation probe can detect the dew point with precision and accuracy through the analysis of the vapor pressure, temperature and absolute air humidity (parameters that define the dew point)
R Panel chronothermostat 503/GREEN
Programmable chronothermostat specifically designed to detect faster the “effective temperature” in radiant systems.
R Panel Towel Hanger
It’s a brushed-steel band with a modern and linear design. It can be mounted on every R Panel (vertically installed)at the desired height.
AD-34/1 Panel Protective Liquid
The additive AD34-1 is a product of the R Panel R&D division, studied for ensuring the maximum efficiency of the radiant panels. The additive is added to the water of the hydraulic plant, inhibits the formation of gas (oxidation) or possible corrosions of the heat exchangers; furthermore it enhances the heat exchange of the panels.